Worx Landroid L1000 Installation Seite 14

EN
9. Joining up the boundary wire
Landroid box includes two small, waterproof boundary wire connectors. They can be used for the following:
A. When your lawn has a very long perimeter and you need extra boundary wire to complete the installation. Please do not exceed
300m of boundary wire: this is the maximum length of the boundary wire perimeter
B. When the boundary wire is cut by accident and you need to fix it
C. When you decide to rework your garden in the future and need to modify the original boundary wire installation
The connectors are waterproof and provide optimal electric connection (Fig.15).
A. Insert both ends of the wire into any two of the three holes of the connector; no need to strip the wires
B. Insert the wires fully until both wire ends are visible on the other side of the connector
C. Press the connector firmly by using a pair of pliers
15
Attention: it is not recommended to simply splice the boundary wire with insulating tape or use a screw terminal block for connection.
A broken circuit may occur after a period of time as soil moisture can oxidize the wire.
13