Package Contents - Axis P3343-VE Installationsanleitung

AXIS P3343-VE/P3344-VE Installation Guide
AXIS P3343-VE/P3344-VE Installation Guide
Follow these instructions to install the network camera:
Notes:
• Before you begin, make sure that the package contents, power supply, and the required cables, tools, and
documentation are available. See Package contents below.
• This network camera is inteded to operate with PoE; if not available use Axis PoE Midspan 1 port (not
included)

Package contents

Item
Network camera with heating
module
Mounting bracket
Dome covers
Cable shield
Weather shield
Labels
Mounting kit
CD
Printed Materials
Optional accessories
.
Downloaded from www.Manualslib.com
"Package contents"
1. on page 3
"Hardware overview"
2.
"Install the hardware"
3.
"Assign an IP address"
4.
"Set the password"
5. on page 11
"Adjust the Lens"
6. on page 12
"Complete the installation"
7.
Models/variants/notes
AXIS P3343-VE/ AXIS P3344-VE
Clear transparent cover
Smoked transparent cover
2 adhesive serial no. labels
Resitorx screw driver, drill template, 5-meter network cable with gasket
4 screws and plugs, 2 long screws, 2 M4x8 screws
1 gasket, terminal block connector
AXIS Network Video Product CD, including product documentation,
installation tools and other software
Installation Guide (this document)
Axis Warranty Document
See www.axis.com for information on available accessories
manuals search engine
on page 4
on page 5
on page 8
on page 12
Page 3