Using The Receiver - BeeWi BBR200 Bedienungsanleitung

At this time, you can turn on your Bluetooth device (Bluetooth transmitter
or Bluetooth mobile phone) to search for the BBR200 receiver and pair it.
Specific pairing steps may vary with different Bluetooth devices. Please refer
to your Bluetooth device's user manual for further information.
When "BBR200" is detected, enter the PIN "0000", and confirm;
After successful pairing, select "BBR200" from Bluetooth device list and
press "connect";
After successful connecting, the indicator light of BBR200 will be on.
Remark: the BBR200 receiver is connected with the Bluetooth device if the
indicator light of the receiver is on. If you want to pair it with another device,
disconnect the the last connected device first and pair the BBR200 receiver
with the new device according to steps 1∼6 mentioned above.

3. USING THE RECEIVER

3.1 Music control
After the BBR200 receiver and the Bluetooth device successful connected,
the music is transmitted to the dock station wirelessly.
If your iPod dock station allows it and the Bluetooth device paired with
the BBR200 receiver supports AVRCP profile, you can remotely control the
pause, play, last and next song functions on the dock station or on the
remote controller provided with the dock station.
3.2 LED Indicator
LED indicator
Blue LED flashes quickly
Blue LED is on
3.3 Turning off the BBR200 receiver
If you don't need to use BBR200, just take it out from the dock station
directly. There is no need to turn off the dock station.
Downloaded from www.Manualslib.com
BBR200 Status
Pairing mode or not connected with a Bluetooth device
Already connected with a Bluetooth device
manuals search engine