Getting Started - BeeWi BBR200 Bedienungsanleitung

1.3. System requirements
-The dock station can charge the iPod via the 30 pin connector port.
1.4. Overview

2. GETTING STARTED

2.1 Connecting the receiver to the dock station
Turn on the dock station before plugging the receiver. Then, set the audio
source to iPod (Please refer to the dock station's user manual);
Finally plug the receiver into the iPod dock 30 Pin connector port; the recei-
ver will start to flash.
Remark:
The receiver is compliant with some iPod dock stations that are powered by
battery. But if it is connected to the dock station and the indicator does not
light up, you are advised to connect the dock station to AC power using the
AC/DC power adaptor provided with the dock station.
2.2 Pairing the BBR200 receiver with a Bluetooth device
Once the receiver is plugged in, it will automatically enter in pairing mode.
Downloaded from www.Manualslib.com
Face
Bottom
iPod connector port
manuals search engine
Led indicator
ENGLISH