Using The Appliance - ECG ZV 1255 Ceramic Wide Bedienungsanleitung

WARNING:
Do not use this appliance
close to bathtubs, showers,
washbasins or other places
containing water.
Do not immerse in water! – Do not immerse in water!

USING THE APPLIANCE

1. Carefully place the straightener on a firm, flat and heat resistant surface and make sure that the surface is
not in contact with the plates of the straightener.
2. Plug the straightener in the electrical outlet and press and hold (for 2 seconds) the switch 4 to turn it on.
The LED display will show the current temperature settings.
3. The default temperature setting is 180 °C. Set the required temperature in range from 120 to 210 °C. During
the heating the temperature indicator flashes until the set temperature is reached.
4. Once the set temperature is reached (in about 30 seconds) the temperature indicator stops flashing and
you can use the straightener.
5. Never use in combination with hair styling foam, hairspray, gel, etc.
Microprocessor control and temperature selection
Thanks to the highly sophisticated microprocessor and display, you can adjust the setting of the hair
straightener according to your specific needs.
• Individual temperature setting: Using the temperature selection buttons 2 and 3, you can set the
working temperature in 30 °C steps in range from 120 °C to 210 °C. We recommend to use the following
temperature settings:
Creating a hairstyle
• Pay attention when using the appliance, the work surfaces have very high temperature.
• Make sure that the hair is completely dry before styling.
• To make it easier to style your hair, divide it in the middle or on the sides, and fasten the parts, which you
are not straightening with clips.
• It is necessary to comb your hair before straightening it to disentangle it.
• Divide the hair into layers and start with straightening from the bottom layers. After straightening the
bottom layers continue with the middle ones and finally straighten the top layers at the parting.
• When you have shorter hair, insert between the scalp and the straightener a comb to prevent contact of
the skin with the hot plates. Do not use the hair straightener too close to the skin of the head, ears and
neck.
• Switch the straightener off and disconnect from the outlet after use.
• You can finish the styling by application of hair balm. Rub the balm in with your palms with smooth
motions from the roots to the tips.
Note: We recommend that people with dyed, fragile, damaged and fine hair use lower degree setting.
To save time and effort, using the maximum amount of heat, established on the highest setting, is
recommended for people with healthy, rough and resistant hair.
6
Hair structure Temperature settings
Fine, coloured or bleached hair 120 °C
Normal hair 150 °C – 180 °C
Strong, unruly hair 210 °C
WARNING
RISK OF EYE BURN
KEEP AWAY FROM
CHILDREN