Personal Safety; Intended Use - Geberit KSS-160 Betriebsanleitung

Personal safety

• Fix the welding plate to a flat, solid substructure.
• Only use the welding plate if it is in perfect working order.
• Do not use the welding plate if tired or under the influence of alcohol, drugs or medic-
ations.
• Do not leave the welding plate unattended.
• Wear non-slip safety shoes.
• Tie up baggy or loose clothing.
• Keep long hair in place with a hair net.
• Store the welding plate in a locked room out of the reach of children.
Maintenance of the electric tool
• Store the welding plate in a dry room.
• Clean the welding plate regularly and check its operability.
• Clean dirty welding plate when slightly warm, using a clean, dry cloth.
• Do not use fluids for cleaning.
• Do not use steel wool or other similar products when cleaning.
• Have any malfunctions and damage to the welding plate repaired immediately by Geberit
or an authorised repair shop.
• Only replace damaged parts with original Geberit spare parts.

Intended use

The Geberit welding plates KSS-160, KSS-200 and KSS-315 may be used for butt-welding
connections of Geberit PE and Geberit Silent‑db20 pipes and fittings only:
• Geberit welding plate KSS-160 for Geberit PE and Geberit Silent‑db20 d 32–160 mm
• Geberit welding plate KSS-200 for Geberit PE and Geberit Silent‑db20 d 32–200 mm
• Geberit welding plate KSS-315 for Geberit PE d 200–315 mm
Any other use or a use extending beyond this is deemed to be improper. Geberit will not
accept any liability for any resulting damage.
5866419979-1 © 12-2018
997.771.00.0 (10)
EN
11