Kenwood Triblade Bedienungsanleitungen Seite 9

Prune Marinade
Small soft prunes
Runny honey
Water
Processing
Speed
Processing Time (secs)
Mashers
important
Never use the masher in a
l
saucepan over direct heat. Always
remove the saucepan from the
heat and allow to cool slightly.
Do not tap the masher on the side
l
of the cooking vessel during or
after mashing. Use a spatula to
scrape excess food away.
For best results when mashing
l
never fill a saucepan etc., more
than half full with food.
A
Plastic Masher (if
supplied)
to use the masher
The masher can be used to
l
mash cooked vegetables such as
potatoes, swede and carrot.
Don't mash hard or uncooked
l
foods - you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
direction until it locks in
6
position.
3 Turn the masher upside down and
fit the paddle over the central hub
and turn anti clockwise to secure
. (If the collar is not fitted
7
then the paddle will not
secure in place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan
or bowl etc.
TYPE HDP30 - press the on
button.
TYPE HDP30
75g
325g
Refrigerated overnight
20g
(at room temperature)
Add the ingredients to
the chopper bowl in the
order stated above.
Turbo
5
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
Move the masher in an up and
l
down movement throughout
the mix until the desired result is
achieved.
7 After use release the on button and
unplug.
8 Press the blender shaft release
buttons to release the masher
assembly.
9 Remove the paddle from the
masher by turning clockwise.
10 Unscrew the collar from the
masher foot.
B
to use the masher
The masher comes with two
l
screens which can be used as
follows:-
Coarse screen - to mash
cooked vegetables such as
potatoes, swede, yams and carrot.
Fine screen - to mash cooked
or soft fruits and vegetables.
Don't mash hard or uncooked
l
foods you may damage the unit.
1 Cook hard vegetables and fruit and
drain first before mashing.
2 Fit the masher collar to the masher
shaft by turning in a clockwise
direction until it locks in position
8
3 Fit either the coarse or fine
screen to the masher shaft – turn
clockwise to lock
6
TYPE HDP40
Add the ingredients to
the chopper bowl in the
order stated above.
Fit the lid and refrigerate
overnight.
Max Turbo
Metal Masherpro™ (if
supplied)
.
9
50g
325g
60g
3
.