Operational Warnings - Loftek Nova Power Bedienungsanleitung

Jump Starting Your Car
1.) Turn on the function button and make sure it is over 50%
charged.
2.) Plug in the jumper cables. The indicator light will flash red
and green alternately when it is in standby. Before starting
your car, please make sure the indicator light on the clamps is
turned to steady green. If you don't connect the clamps with
the jump starter and the car well, the indicator light will stay
red.
3.) Connect the red clamp to the positive terminal (+) and
black clamp to the negative terminal (-) of your car battery.
When the indicator light turns to steady green, it means that
the clamps are connected well and it's ready to work.
05
4.) Start your engine.
5.) After successfully starting your car, remove clamps and
pack away.
Operational
Warnings
1. To avoid serious injury to a person or
damage to the jump starter, never attempt to
connect the two clamps together. Connecting
the positive and negative poles of the wiring
will lead to short-circuiting, which is very
dangerous.
2. Important: Confirm that the clips of the
jump starter clamp the positive and negative
poles of the car battery correctly. If the
positive and negative terminals are reversed,
it will cause damage to the vehicle.
06