Loftek Nova Power Bedienungsanleitung Seite 4

At A Glance
3
2
5
6
4
8
7
1
1. 12V DC Output
3. LED Indicators
5. Jumping Port
7. Output 5V/3A, 9V/2A, 12V/1.5A
9. Indicator light on the clamps
03
9
2. Function button
4. USB-C Input/Output Port
6. Output 5V/2.1A
8. Flashlight
Battery Jump Starter Basic
Management
1.) Avoid Over-charge
We also need to charge the Jump Starter when not in use. But
if the power supply is fully charged and continues to be
charged, it will cause the battery internal pressure to rise,
battery deformation, leakage, and even combustion, and the
battery performance will be significantly reduced and
damaged.
2.) Avoid Over-discharge
1 If the Jump Starter has not been used for a long time, it will
make the battery discharge excessively, and the internal
structure of the battery will change, which will directly cause
the battery capacity to be seriously attenuated, leading to
failure to charge.
2 Continuous discharge. When the Jump Starter is
discharged, the stored electrical energy is gradually released,
and the voltage is slowly decreased. When the voltage drops
to a certain value, discharge should be stopped and
recharged to restore the energy storage state of the battery.
Continuing to discharge below this specified value is defined
as over-discharge that may cause damage to the electrode
active material, loss of reaction ability, and shorten the
battery life.
3.) Avoid Over-temperature
Stop the discharge if the temperature is too high. In the
summer when the car is exposed to the sun, If the tempera-
ture of the Jump Starter in the car is too high, you should stop
discharging and put it in a cool place. Start using it after the
temperature drops.
04