Regulatory Compliance - 3M Petrifilm Plattenleser Advanced Wichtige Informationen

• This equipment is not intended for use in residential environments and may
not provide adequate protection to radio reception in such environments.
Reduce the risks associated with exposure to biohazards and environmental
contamination:
• Follow current industry standards and local regulations for the disposal of
biohazardous waste and electronic waste.

Regulatory Compliance

Health and Safety Information
Device Safety Compliance The 3M Petrifilm Plate Reader Advanced complies
with the following standards as demonstrated by the CB Scheme Certificate
and test report issued by UL, LLC (UL): • IEC/EN 61010-1:2010. Safety
requirements for electrical equipment for measurement, control, and laboratory
use - Part 1: General requirements • 3M Petrifilm Plate Reader Advanced is UL
Listed and carries the UL mark with adjacent indicators "C" and "US" based
on compliance to the standards UL 61010-1, CAN/CSA 22.2 No. 61010-1. The
3M Petrifilm Plate Reader Advanced complies with the CE mark related to the
Low Voltage Directive (LVD) 2014/35/EU as confirmed in the Declaration of
Conformity. The 3M Petrifilm Plate Reader Advanced complies with the RoHS
Directive, Directive 2015/863 of the European Parliament and of the Council
of 31 March 2015 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment. 3M Petrifilm Plate Reader Advanced
complies with China RoHS II requirements. 3M Petrifilm Plate Reader Advanced
complies with the WEEE Directive, Directive 2012/19/EU of the European
Parliament and of the Council of 04 July 2012 on waste electrical and electronic
equipment (WEEE).
EMC Compliance
The 3M Petrifilm Plate Reader Advanced complies with the following EMC
standards as confirmed in the Certificate of Compliance generated by 3M:
• IEC 61326-1:2012/EN 61326:2013 Electrical equipment for measurement,
control and laboratory use - EMC requirements - Part 1: General requirements
• EMC requirements of the CE mark EMC Directive 2014/30/EU. This
equipment is not intended for use in residential environments and may
not provide adequate protection to radio reception in such environments.
The 3M Petrifilm Plate Reader Advanced complies with the Australian and
New Zealand electrical safety and electromagnetic compatibility requirements
as confirmed in the Supplier's Declaration of Conformity that is linked to the
Australian/New Zealand Regulatory Compliance Mark (RCM). Innovation,
Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3 (A)/NMB-3(A). This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radiofrequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
5