Herunterladen Inhalt Inhalt Diese Seite drucken

Mantis 8550-01-38 Originalbetriebsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

f) If dust extraction/collection devices are provided
make sure that they are connected and used
properly. The use of these devices reduces hazards
caused by dust.
4) Careful handling and use of power tools
a) Do not overtax the power tool. Use the power tool
intended for your type of work in each case. The
use of the suitable power tool within the stated range of
performance makes working more effective and safer.
b) Do not use a power tool with a damaged switch. A
power tool that cannot be switched on or off any more
is dangerous and must be repaired.
c) Remove the battery from the power tool before you
adjust a tool, change accessories or put the tool
aside. This precaution avoids the unintentional start
of the tool.
d) Store power tools out of the reach of children. Do
not allow persons to use the tool if they are not
familiar with the tool or these instructions. Power
tools are dangerous if used by inexperienced persons.
e) Thoroughly maintain your power tool. Check
whether moving parts are working properly and are
not jamming/sticking, and whether parts are broken
or otherwise damaged in a way that affects the
function of the tool. Have damaged parts repaired
before using the tool. Many accidents are the result
of poorly maintained power tools.
f) Keep cutting tools sharp and clean. Thoroughly
looked-after cutting tools with sharp cutting edges are
jamming less often and are easier to guide.
g) Use power tools, accessories, add-on tools, etc.
in accordance with these instructions and in the
way prescribed for the respective type of tool. You
should also consider the working conditions and
the work to be carried out. The use of power tools for
purposes other than those intended for the respective
tool may result in dangerous situations.
5) Appropriate handling and use of battery-operated
power tools
a) Only use charging devices recommended by the
manufacturer to charge the batteries. Charging units
are usually designed for certain types of batteries; if used
with other types there is a risk of fire!
b) Only use batteries designed for your power tool. The
use of other batteries may lead to injury and risk of fire!
c) Keep unused batteries clear of paper clips, coins,
keys, nails, screws or other small metal objects that
may bridge the contacts. A short circuit between the
battery contacts may lead to burns or fire!
d) Improper use may result in fluid leaking out of the
battery. Avoid any contact with battery fluid. Flush
with water in case of contact. If battery fluid should
get into your eyes seek medical advice additionally.
Leaking battery fluid may lead to irritations of the skin
or burns!
7
Downloaded from
www.Manualslib.com
GB | Operating Instruction
Battery Powered Grass - and Shrub Shear- Operator's Manual
manuals search engine
6) Service
a) Have the power tool serviced by qualified technical
personnel only; repairs should be carried out using
exclusively original spare parts. This will ensure the
safe operation of the power tool.
7) Safety instructions for hedge trimmers:
1. Keep all parts of your body away from the cutting
blades. Do not try to remove cut-off matter with the
tool running. Do not try to hold material to be cut off
with your hand. Remove cut-off matter that is stuck
between the blades only with the battery removed
from the tool! When working with hedge trimmers even
a short moment of inattentiveness may result in severe
injury.
2. Carry the hedge trimmer at the handle with the
cutting blades standing still. Always put on the
protection cover when transporting or storing the
hedge trimmer. Careful handling reduces the risk of
injury through the cutting blades.
3. Please consider environmental influences. Ensure
that there is good lighting.
4. The
use
of
hedge
certain risks. Attention: Danger! Rotating machinery.
5. The hedge trimmer should always be held with both
hands.
6. Before using the equipment clear the working area of
any foreign objects and be aware of foreign objects
during operation of the machine!
7. Do
not
use
the
and do not use it to cut wet hedges. Do not wash
down the device with water. Do not use any high-
pressure cleaning devices or steam jet devices for
cleaning.
8. In
line
with
agricultural
Regulations only persons over the age of 17 may
work on their own with electric hedge trimmers. Use
is permitted for persons over 16 years if the work is
carried out under the supervision of adults.
9. Ensure
that
the
shears can not be switched on by mistake when you
put it down after work or when you are going to clean
the device.
10. Be aware of your responsibility as user towards third
parties in the working area.
11. The trimmer must be properly checked and serviced.
If the blades get damaged
exchanged in pairs. In the event of damage from
impact, specialist's inspection is essential.
12. Ensure that the equipment is stored safely after use in
such a way that the blade cannot be touched.
13. For initial use of the hedge trimmer we would
recommend that in addition to reading the operating
instructions, you also seek a practical demonstration
from an expert.
14. Always ensure that all protective devices and handles
are properly fitted. Never attempt to use an incomplete
trimmers
involves
trimmer
in
wet
weather
Trade
Association
motor
of
your
hedge
they should only be

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

8550-01-40

Inhaltsverzeichnis