Herunterladen Inhalt Inhalt Diese Seite drucken

Storing The Trimmer After Use; Repair Service; Waste Disposal And Environmental Protection - Mantis 8550-01-38 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Gear protection feature
If solid objects are caught in the cutting blade and jam the
motor, switch off the machine at once, disconnect the battery
from the power tool, remove the object and continue with
the work.
The equipment is also fitted with an overload cutout, which
protects the gears against mechanical damage in the event
of blade jams.

14. Storing the trimmer after use

The hedge shears must be stored such that there is no
danger of injuries being caused to persons by the cutting
blades!
Important note: The shearing blades should be cleaned
after each use.(see also Section Maintenance).This will
considerably increase the service life of the device. Please
use a lubricator that is not harmful to the environment, e. g.
our service spray. Then put the shears in their case with the
cutting blades first.

15. Repair service

Repairs to electric power tools should only be carried out by
specialist electrical personnnel.
UK
Mantis UK Limited
Orchard House
Hempshaw Lane
Stockport
Cheshire SK1 4LH
Phone - 4401614741525
Europe
Mantis France SARL
20 rue des Garennes
Marly
France
51755
Phone - 330387628888

16. Waste disposal and environmental protection

If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose of the
device together with your domestic refuse, but dispose of it
in an environmentally friendly manner.
Please dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can be
separated and recycled. Information concerning the disposal
of materials and devices are available from your local
administration.
Downloaded from
www.Manualslib.com
GB | Operating Instruction
Battery powered Hedge-Trimmer - Operator's Manual
manuals search engine
10

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

8550-01-40

Inhaltsverzeichnis