ASROCK Z97 Pro3 Handbuch Seite 24

22
Downloaded from www.Manualslib.com
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 24)
(3-pin CPU_FAN2)
(see p.1, No. 26)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 5)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 2)
PCIe Power Connector
(4-pin PCIE_PWR1)
(see p.1, No. 25)
Serial Port Header
(9-pin COM1)
(see p.1, No. 22)
manuals search engine
his motherboard pro-
1 GND
vides a 4-Pin CPU fan
2 +12V
FAN_SPEED
3
(Quiet Fan) connector.
FAN_SPEED_CONTROL
4
If you plan to connect a
3-Pin CPU fan, please
GND
FAN_VOLTAGE
connect it to Pin 1-3.
FAN_SPEED
his motherboard pro-
12 24
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
1 13
his motherboard pro-
8 5
vides an 8-pin ATX 12V
power connector. To use a
4 1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
Please connect a 4 pin molex
power cable to this connector
when more than three
graphics cards are installed.
his COM1 header
RRXD1
DDTR#1
DDSR#1
supports a serial port
CCTS#1
module.
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1