Hitachi RAR-5J1 Anleitung Seite 11

ECO SENSOR
With the eco sensor, the air conditioner can detect the activity level in a room and adjust the temperature
and humidity automatically, thus achieving the purpose of energy saving.
The energy saving effect can be achieved only after the energy-saving temperature control function keeps working
for more than 2 hours.
In the energy-saving temperature-control mode, the energy consumption saved by the air conditioner varies with
the activity level.
Comfort airflow (Page
After detecting that the person leaves the room for 30 minutes, the air conditioner turns to the ECO modes according
to the settings in the remote controller as shown in the right table, but the preset temperature and humidity
in the remote controller remain unchanged.
When the air conditioner works in powerful operation, setting the ECO mode will cancel the powerful operation.
The eco sensor
may be affected negatively in the following cases:
The activity level is very low (reading, watching TV, etc.) or human bodies are blocked by a screen, cabinet, or glass board.
The indoor temperature is very high and exceeds or approaches the human body temperature (when the refrigeration
just begins).
The person wears thick clothes and turns his/her back to the air conditioner.
Curtains or plant leaves swing due to pet movement or airflow.
Downloaded from www.Manualslib.com
Press the
 1
The eco sensor automatically adjusts the
indoor temperature and humidity according to
the activity level in the room. However, the
temperature and humidity specified by the
remote controller remain unchanged.
Operation mode
Heating
Cooling
Dehumidifying
Auto
12) can further reduce the energy consumption.
2SHUDWLRQ PRGe
Heating
Cooling
Dehumidifying
Auto
detects changes to the infrared generated by human bodies. Therefore, the accuracy of
manuals search engine
ECO SENSOR button.
Operation Description
Reduces the preset temperature
in one of the following cases:
High activity level
High indoor temperature
Raises the preset temperature
in one of the following cases:
Low activity level
Low indoor temperature
Increases the preset temperature
in one of the following cases:
Low activity level
Low indoor temperature
Energy-saving operation in auto
mode.
Actions LQ FDVH RI QR person
Decreases the temperature by 2°C.
Increases the temperature by 2°C .
Increases the temperature by 5–10%.
Energy-saving operation in auto mode.
– 11 –
Example: Cooling
eco sensor