Herunterladen Inhalt Inhalt Diese Seite drucken

Safety; Intended Use Of The Machine; Technical Restrictions; Prohibited Use / Forseeable Misuse - Zipper Maschinen ZI-FKS250 Betriebsanleitung

Formatkreissäge
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12

SAFETY

This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully
before commissioning. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property.
Also observe the symbols and pictograms used on the machine as well as the
safety and danger information!

12.1 Intended Use of the Machine

The machine is intended exclusively for the following activities:
Longitudinal, transverse, format cutting of wood and materials with similar physical properties to
wood within the specified limits.
ZIPPER-MASCHINEN
beyond this and for any resulting damage to property or injury.
12.1.1

Technical Restrictions

The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (operational)
Temperature (Storage, Transport)

12.1.2 Prohibited Use / Forseeable Misuse

-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment (machine can generate
ignition sparks during operation)
-
Operation of the machine in closed rooms without chip and dust extraction (a normal
household vacuum cleaner is not suitable as an extraction device).
-
Operating the machine outside the limits specified in this manual
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
-
Cutting of materials with dimensions outside the limits specified in this manual
-
Use of tools which do not meet the safety requirements of the standard for machine tools
for woodworking (EN847-1).
-
Use of saw blades that have a lower maximum speed than the machine
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.

12.2 User Requirements

The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the machinery
safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the operator
and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
assumes no responsibility or warranty for any other use or use
max. 65 %
+5° C bis +40° C
-20° C bis +55° C
SAFETY
23
ZI-FKS250

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis