Slot SCP-2 Anleitung Seite 2

Thank you for purchasing this Slot.it controller. Before starting, please make sure you have read
the following instructions carefully.
The SCP-2 is contactless, friction free, with linear magnetic trigger position readout (patented), and
features an interchangeable cartridge system, to connect to either analog or digital systems. The
digital cartridge is universal for all the available commercial brands (Ninco, Carrera, Hornby and
Tecnitoys). It is also the standard controller for the Slot.it oXigen digital system.
Warranty: two years. We reserve the right to refuse repair under warranty if safety seal is broken.
There's no safety seal in this device, anyway, so it's hard to break it. This device complies with
RoHS directive. Do not immerse this controller in water.
No animals have been used for testing this controller, and almost no slot cars flew off the track
during the development phase. The name SCP-2 means SeCaPelo-2 (Secapelo=Hairdryer).
Made in Italy.
This is the result of the hard work of Maurizio Ferrari, Maurizio Gibertoni, Cristian Anceschi of
Galileo Engineering srl, Via Cavallotti 16 – 42100 Reggio Emilia, Italy - www.slot.it - info@slot.it
Now you know who to blame.
Slot.it and the Slot.it logo are registered trademarks belonging to Galileo Engineering srl.
Slot.it is in no way affiliated with Carrera, Hornby Hobbies, Ninco, Tecnitoys; Carrera Pro-X,
Carrera Digital 132, Hornby SSD, Ninco N-Digital, Tecnitoys The Digital System SDS, are
registered trademarks belonging to their respective owners.
Das komplette Handbuch kann von der Slot.it Website (www.slot.it) heruntergeladen werden.
2/27 v.1.00 5/3/2014