Ratio Electric Solar Box EVO080 Bedienungsanleitung Seite 24

24
CONFIGURING THE S OLAR BOX
The Solar Box has a display to show the charging status and push buttons to do
the setup. After you have connected the Solar Box to the power you will see in the
display: Ready to charge
Hold the center button for 2 seconds to enter the menu. You can now use the left
and right buttons to go to the different menu options.
Pressing the center button, selects the option, and allows you change the value
(for example change the charging current).
What is displayed depends on the options you have set.
If you enabled smart mode (MODE->SMART) then the MAINS and MIN option will
be shown.
If you selected the CONFIG->FIXED option, a fixed cable is to be used.
The EXIT menu option stores the settings, if you don't want to store the settings,
wait 2 minutes (or disconnect the mains) and the setup menu will be exited without
saving any settings.
After starting, the charger is always ready to charge with the previous settings.
You can't access the setup during the charging.
www.ratio.nl
www.ratio.nl