Alto Professional RMX1008DFX Kurzanleitung Seite 6

EFFECTS
TO HEAR THE EFFECTS ON A CHANNEL: Use the Effects Selector to choose one of the effects below, adjust the
parameter with the Variations Selector, then turn up the Aux 2/FX Post knob for that channel.
#
1
2
3
4
5
6
7
8 TAPE REVERB
9 SPRING REVERB
10
11 STEREO DELAY
12
13
14 REVERB+DELAY
15 REVERB+FLANGER Stereo flanger effect with room reverb.
16 REVERB+CHORUS Stereo chorus effect with room reverb.
Downloaded from www.Manualslib.com
PRESET
VOCAL 1 Reverb, simulating a room with a small delay time.
Reverb, simulating a small space with a small delay
VOCAL 2
time.
LARGE HALL Reverb, simulating a large acoustic space.
SMALL HALL Reverb, simulating the acoustics of a stage space.
Reverb, simulating a studio with many early
LARGE ROOM
reflections.
SMALL ROOM Reverb, simulating a bright studio room.
PLATE Simulates bright plate reverb.
Simulates classic tape delay created by multiple
playback heads.
Simulates the lightly stretched sound of spring
reverb from analog transducers.
MONO DELAY Reproduces the signal after a small period of time.
Reproduces the signal after a small period of time
with a slight difference between the two stereo
channels.
Classic stereo flanging effect, similar to a jet plane
FLANGER
taking off.
Simulates the full, complex, watery sound of several
CHORUS
instruments playing the same thing.
Delay effect with room reverb.
manuals search engine
DESCRIPTION
6
PARAMETER RANGE
Decay time 0.8~1.1s
Pre-delay 0~79ms
Decay time 0.8~2.5s
Pre-delay 0~79ms
Decay time 3.6~5.4s
Pre-delay 23~55ms
Decay time 1.0~2.9s
Pre-delay 20~45ms
Decay time 2.9~4.5s
Pre-delay 23~55ms
Decay time 0.7~2.1s
Pre-delay 20~45ms
Decay time 0.6~6.1s
Pre-delay 10ms
Decay time 1.3~5.4
Pre-delay 0~84ms
Decay time 1.3~5.4s
Pre-delay 0~84ms
Delay period 60~650ms
Delay period 210~400ms
Feedback 37~73%
Rate 0.16~2.79Hz
Rate 0.5~5Hz
Delay period
211~375ms
Reverse decay
1.0~2.9s
time
Flanger rate
Reverse decay 0.16~2.52Hz
time
Chorus rate
0.5~4.74Hz
Reverse decay
1.5~2.9s
time