Syris Scientific v300 Benutzerhandbuch Seite 15

Syris Scientific, LLC
Handling, Cleaning, and Storage
To keep your v300/v600 Visualization System in optimum condition, please follow
the handling, cleaning, and storage guidelines.
Handling
• To avoid scratching or smudging the Visi-Shield, handle the system by grasping
the headband.
• The Upper and Lower DC Power Cords are built to be lightweight and are
therefore not armored. Use care when handling the power cords and ensure
that they are not pulled or pinched. Damaged cords may not be covered by the
limited product warranty.
Cleaning
• Clean the system after every use that may have caused contamination.
• Clean the entire product with approved disinfectant towelettes or towelettes
containing isopropyl alcohol.
• Never clean any component of the system with hard or abrasive objects.
• After cleaning the system, it is recommended that the Visi-Shield and magnifying
lenses be wiped with optical cloth or equivalent non-abrasive, non-linting cloth.
• Never autoclave any component of the system.
Storage
• To protect the system, it is suggested that it be stored in the box it was shipped in.
• For short term storage, the Power Supply may remain plugged in, but the Power
Control Module should be turned off.
• For long term storage, Power Supply should be unplugged.
14
Downloaded from www.Manualslib.com manuals search engine
www.syrisscientific.com