HOW TO CHECK REMOTE AND
INDOOR TEMPERATURES
The indoor temperature is shown on the second line of the display.
As for the remote sites or channels, press [CHANNEL] to go from
one channel to another. The kinetic wave display on the channel
number indicates if the reception of that particular channel is in
good order.
If no readings are received from one particular channel for more
than two minutes, blanks "---" will be displayed until further
readings are successfully searched. Check if the remote unit
is sound and secure. You can wait for a little while or press
[CHANNEL] and [MEMORY] simultaneously to enforce an
immediate search. Of course no reading will be shown if no remote
unit is assigned to that channel.
If the temperature goes above or below the temperature measuring
range of the main unit or the remote unit (stated in specification),
the display will show "HHH" or "LLL".
TEMPERATURE TREND
The temperature trend indicator on the screen shows the trend of
samplings collected at that particular remote site. Three trends,
rising, steady and falling, will be shown.
Arrow
indicator
Temperature
Trend
RMR183-e R2 OP
Downloaded from
www.Manualslib.com
Rising
Steady
6
Black
manuals search engine
The maximum and minimum recorded indoor temperatures and
those of outdoor channels will be automatically stored in memory.
To display them:
1. Select the channel to be checked.
2. Press [MEMORY] once to display the maximum temperature
and again the minimum temperature. The respective indicators,
MAX or MIN will be displayed.
To clear the memory, hold down [MEMORY] for two seconds. The
maximum and minimum temperatures will be erased. If you press
[MEMORY] now, the maximum and minimum temperatures will
have the same values as the current ones until different readings
are recorded.
The unit of temperature display is selected with the °C/°F slide
switch. Select °C for Centigrade or °F for Fahrenheit.
THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal receiving status of the
main unit. There are three possible forms:
Falling
6
MAXIMUM AND MINIMUM
TEMPERATURES
°
NOTE ON
C AND
HOW TO READ
8/21/04, 6:22 PM
°
F