Low Battery Warning - Oregon Scientific Rmr183 Bedienungsanleitung

Note that the effective range is vastly affected by the building
materials and where the main and remote units are positioned. Try
various set-ups for best result.
Though the remote units are weather proof, they should be placed
away from direct sunlight, rain or snow.
BATTERY INSTALLATION AND
CHANNEL SETTING: REMOTE UNIT
The remote unit uses two (2) UM-4 or "AAA" size 1.5V batteries.
Installation:
1. Remove the screws on the battery compartment.
2. Select the channel on the CHANNEL slide switch.
3. Insert the batteries strictly according to the polarities shown.
4. Replace the battery compartment door and screws.
RMR183-e R2 OP
Downloaded from www.Manualslib.com
4
Black
manuals search engine
Note:
1. Replace batteries when the low-battery indicator of a
particular channel activates on the main unit.
2. Once a channel is assigned to a remote unit, it can only be
changed by removing the batteries or resetting the unit.
BATTERY INSTALLATION: MAIN UNIT
1. Open the battery compartment door.
2. Install 2 batteries (UM-3 or "AA" size 1.5V) strictly according
to the polarities shown.
3. Replace the battery compartment door.

LOW BATTERY WARNING

When it is time to replace batteries, the low-battery indicator will
show up when the corresponding channel is selected. The battery
level of the main unit will be shown on the indoor temperature
when it is running low.
4
8/21/04, 6:22 PM