Performance Watch Modes; Time Of Day Mode; Time Of Day Mode Terminology; Time Of Day Mode Functions - Timex Performance w188 Bedienungsanleitung

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 22
P W
E R F O R M A N C E

Time of Day Mode

INDIGLO®
night-light
To Chronograph
Mode

Time of Day Mode terminology

UTC: Universal Time, Coordinated (formerly known as GMT)
describes the local time zone in relationship to the Greenwich
Meridian. For example, New York City is in the -5 UTC zone, since
New York is five hours earlier than Greenwich Meridian; Moscow
is +3 UTC, since it is three hours later than Greenwich Meridian.

Time of Day Mode functions

Your Watch can act as an ordinary watch to display the time, date,
and day for two different time zones, using a 12- or 24-hour
format.
22
Downloaded from www.Manualslib.com
M
A T C H O D E S
View performance
data
Hold to set
View or switch to
secondary time
manuals search engine
You can return to Time of Day Mode from any other mode on the
Watch by pressing and holding MODE until the time of day
displays.

TO SET TIME OF DAY

For instructions on setting Watch functions, including Time of
Day, refer to page 13, "To set Watch functions."
For Time of Day, you can set the following values:
Hour Month
Minute Date (automatically sets the day of week
when you set the date)
Year Hour format (i.e., AM/PM versus 24-hours)
NOTE: You cannot adjust seconds. When you use the Watch with
the GPS-3D Sensor, it will align with UTC.
When switching between Standard Time and Daylight
Savings Time, manually adjust the hour.
You can set the Watch slightly ahead or behind current
time. For example, if you typically arrive ten minutes
late, set the Watch ten minutes ahead. The Watch
remains ahead of time even when you synchronize it with
the GPS-3D Sensor.
23