Setting The Alarm(S); Activating / Deactivating The Alarm(S); Alarm Sound; Snooze / Turning The Alarm Off - Oregon Scientific Rmr939P Bedienungsanleitung

Alarm 1 (Melody)
Alarm 2 Disabled

SETTING THE ALARM(S)

1. Press and hold CLOCK ALARM for 2 seconds to
enter the Alarm Setting Mode.
2. Alarm 1 will start flashing. Use the
buttons to toggle between alarm 1 and 2. Then press
CLOCK ALARM to select alarm 1 or 2. The hour
will start flashing.
3. Enter the value by pressing the
4. Confirm the entry by pressing the CLOCK ALARM
button and move on to the next setting.
5. Repeat (3 and 4) to set alarm 1 / alarm 2 - minute,
melody alarm and / or vibration alarm (optional). If
the melody alarm is selected, repeat (3 and 4) to
select the melody / beep alarm sound and volume.
6. The daily alarm will be on automatically after setting.
Press CLOCK at any time to exit the Alarm Setting Mode.
RMR939P English R8 OP
Downloaded from www.Manualslib.com
Alarm 2 (Wake-Up) Alarm 2 Melody
+ Wake-Up
or buttons.
15
Black
manuals search engine

ACTIVATING / DEACTIVATING THE ALARM(S)

• Press the CLOCK ALARM button to toggle
between alarm 1 and alarm 2 ON / OFF.
• When the melody or vibration alarm icons appear
on the display the alarm is activated. When the
icons do not appear the alarm is deactivated.

ALARM SOUND

When activated, the alarm icon flashes, the backlight
will come on for 8 seconds and the alarm melody or
beep sound will play. If no key is pressed the alarm will
play for 2 minutes.
NOTE See "Setting the Alarm" section to choose the
and
alarm melody / beep alarm and / or the vibration alarm.

SNOOZE / TURNING THE ALARM OFF

To silence the alarm:
• Press SNOOZE / LIGHT to silence it for 8 minutes.
The alarm 1 or alarm 2 icon will flash to show
snooze is enabled. Press and hold for 2 seconds
to turn off snooze.
OR
• Press any key except SNOOZE / LIGHT to mute
the alarm and activate it again in 24 hours.
15
8/23/04, 11:55 AM