Setting The Clock / Calendar; Backlight; Temperature; Alarm - Oregon Scientific Rmr939P Bedienungsanleitung

SETTING THE CLOCK / CALENDAR

Before you can manually set the clock and calendar,
you must specify the current time zone you live in and
the time format (12- or 24-hour) as follows:
1. Press and hold the CLOCK button for 2 seconds.
The time zone offset hour digits will flash. When an
offset hour has been set (e.g. +1, the time displayed
will be the RF clock time plus 1 hour).
2. Enter the value by pressing the
3. Confirm the entry by pressing the CLOCK button.
The 12- or 24-hour display format will flash.
4. Repeat (2) and confirm the entry by pressing the
CLOCK button.
5. Repeat the above procedures to set the hour, minute,
year, MM / DD or DD / MM format, month, day and
day of the week language.
6. Press CLOCK ALARM or MOTION ALARM to exit
the Clock Setting Mode.
RMR939P English R8 OP
Downloaded from www.Manualslib.com
or buttons.
14
Black
manuals search engine
You can select 1 of the 5 following languages:
SYMBOL

BACKLIGHT

Press SNOOZE / LIGHT to activate the backlight for
5 seconds.

TEMPERATURE

To choose between °C / °F, press the °C / °F button to
select the setting you want.

ALARM

ALARM DISPLAY

The melody and vibration alarm icons indicate the daily
alarm settings. Any disabled alarm will show no melody
or vibration alarm icons.
14
LANGUAGE
English
German
French
Italian
Spanish
8/23/04, 11:55 AM