ratiotec rapidcount B 20 Bedienungsanleitung Seite 10

Counterfeit detection
The rapicount B 20 checks the ultraviolet and infrared features and the B 40 additionally checks the
magnetic features of banknotes. If a suspicious banknote is found, the machine will stop automatically,
a warning sound will appear and an error message will be shown on the display. The top banknote in
the banknote stacker is the suspicious one. Remove it and press START/RESET to continue the counting
process. By pressing UV or MG, it is possible to switch on/off the ultraviolet or magnetic detection.
Error messages
The rapidcount B is a reliable banknote counter. However, errors may occur during operation, neverthe-
less because the banknote counter checks for counterfeit banknotes too. For trouble-free operation, we
recommend an annual maintenance of the product and a regular cleaning of the machine by using the
cleaning set (optionally available), compressed air (optionally available), a soft cloth or a brush. Switch
off the machine before proceeding to its cleaning.
The following error messages may appear during the self-test after switching on the machine and
during the counting process. Amongst others, they indicate suspicious banknotes.
Error messages
A
b
C
d
F
E-0
10
Downloaded from www.Manualslib.com
Cause
UV error
MG error
IR error
format error
Incomplete banknote
Error of the left counting sensor
manuals search engine
Action
Remove the suspicious banknote
and continue the counting process
by pressing START/RESET.
Remove the suspicious banknote
and continue the counting process
by pressing START/RESET.
Remove the suspicious banknote
and continue the counting process
by pressing START/RESET.
Remove the suspicious banknote
and continue the counting process
by pressing START/RESET.
Remove the plastic cover and clean
the sensors.
Please contact our service team.