Cisco 200-Serie Kurzanleitung Seite 11

To use the
following:
• To reboot the smart switch, press the
• To restore the smart switch configuration to the factory default settings:
200 Series Smart Switches
Downloaded from www.Manualslib.com
Returning the Device to the Factory
5
Default Settings
Reset button to reboot or reset the smart switch, do the
seconds.
1. Disconnect the smart switch from the network or disable all DHCP
servers on your network.
2. With the power on, press and hold the
10 seconds.
manuals search engine
Reset button for less than 10
Reset button for more than
11