Care And Maintenance - Westinghouse WFVCR310 Bedienungsanweisungen

CARE AND MAINTENANCE

It is important to clean your robotic vacuum cleaner regularly to prolong its lifespan.
• Remove and clean the dust box/water tank (21).
• Wash the dust box cover (22) Hepa filter supporter (25) and dust outlet (27).
Make sure they are completely dry before assembling to the sponge (23) and
Hepa filter (24).
• Tap the sponge (23) and Hepa filter (24) to knock out any debris. Do not wash
them with water.
• Unscrew the dust box/water tank (21) and dry the filter materials completely.
• Unscrew and wash the edge-cleaning side brushes (12) (18). Make sure
the yellow and gray sides are fixed properly after cleaning as they are not
interchangeable.
• Clean the cleaning cloth (15) with detergents and dry it after mopping.
• Wipe the anti-drop sensors with a dry soft cloth to maintain the sensitivity of
the inductor.
• Clean the transparent signal window (5) with a dry cloth to avoid dodging.
• Remove and clean the universal wheel (9) and driving wheels (13) (17) to reduce
noise and tangled hair.
• Clean the charging pins (29) with a dry cloth to make sure the automatic
charging process works well.
Note:
• Unplug the power cord from the charger before cleaning.
• Never use solvents and abrasives, hard brushes, metallic or sharp objects for
cleaning. Solvents are harmful to health and attack the plastic parts. Abrasive
cleaners and tools may scratch the surface.
• The appliance should be stored safely and in an upright position.
• Inspect the power cord of the charger before charging and make sure it is not
damaged.
WFVCR310_Roboticvacuumcleaner_5L.indd 11
18 (grey) 12 (yellow)
EN
11
11/19/2019 3:14:23 PM