Westinghouse WFVCR310 Bedienungsanweisungen Seite 10

Selecting different cleaning modes
You can use the smartphone app or remote control to select your preferred cleaning
mode. For more information, launch the app interface or see 'REMOTE CONTROL' in
this manual.
• Auto cleaning: Select this mode for full coverage cleaning.
• Edge cleaning: Select this mode if you want to focus cleaning on the wall edges
or corners of your house.
• Spot cleaning: Select this mode if you want to focus cleaning on specific areas
with fewer obstacles.
• Powerful cleaning (only available within the smartphone app): Clean more
thoroughly with increased suction power.
• Return to charging: Select this option when the battery level is low.
Setting the cleaning time in the smartphone app
For convenience, you can use the preset timer function in the smartphone app to
choose the desired cleaning time and cleaning mode.
Using as a mop
1. Remove the dust box/water tank (21).
2. Open the rubber plug (20) and add water.
3. Close the rubber plug (20) and replace the
dust box (2).
Note: When you use the cleaning cloth (15), place it at the bottom of the main unit
(a).
EN
10
WFVCR310_Roboticvacuumcleaner_5L.indd 10 11/19/2019 3:14:22 PM