Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Wiring details
1. Disconnect the power supply and secure it against reconnection.
2. Remove the existing wall switch.
3. Connect the dimmer according to the wiring diagram.
4. Mount the cover frame and put the dimmer knob on the shaft.
5. Turn power back on and test dimmer function.
Note:
The dimmer must always be connected to the phase side of the load.
Dimmers MUST NOT be connected in parallel or in series to a load.
One-way wiring diagram
N
L
P
P
Werbung
Inhaltsverzeichnis
