Functions; Report Function; Print Function; Batch Stop - CASH CONCEPTS CCE 6000 Bedienungsanleitung

CCE – Cash Concepts Europe GmbH
von-Behring-Straße 6a – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh

Functions

With the following functions you can use additional possibilities to adapt the money processing with the CCE 6000 even more to
your requirements.
Report function (Button REPORT)
The report function allows you to display the detailed contents of a mixed
banknote stack after the counting process. Press the REPORT key to
display the number of counted valences with the totals per valence and
the total sum of the counted currency. You can use the arrow key to
display the second page of the list. In the case of mixed currency
counting, the Euro display is followed by the other counted currencies.
Print function (Button PRINT)
For payroll accounting, the CCE 6000 offers you the possibility to print out
the counting result with the counted valences, the individual totals and
the grand total via an optional printer (CCE 2010). Please note that we
cannot guarantee the function for third-party printers and do not offer
support for them. By pressing the PRINT key the data is transferred. You
will find a sample printout opposite.
Batch Stops (Button BATCH)
You can use the counting stops in all counting variants to set the number
of counted banknotes after which the machine should stop. The counting
process is automatically continued when the banknotes are removed
from the stacker until all banknotes have been counted or the counting
stop has been reached again. By pressing the BATCH button several times
you can choose between the pre-programmed values 100 - 50 - 20 - 10 -
5 and no counting stop "---". By pressing the +1/+10 key you can adjust
the values individually. Pressing increases the value by 1 and holding it
down increases it by 10. Pressing the CLEAR key clears the count stop.
The currently set counting stop is shown in the top right hand corner of
the display. In the adjacent graphic you can see an activated batch value
of 100 banknotes.
Add function (Button ADD)
The CCE 6000 has an addition function with which several stacks of
banknotes can be counted one after the other and the results are then
added up. The activated addition function is shown as "ADD" in the
display above next to the selected counting mode. Pressing the ADD key
switches the function on and off.
P a g e | 8 E n g l i s h