Lamp Replacement - Elektrabregenz DB 6043 Benutzerhandbuch

3 Installation and Use of the Appliance
3.4.2 Use of the Digital Switch
A B
1 2
A- 1. Level Button
B- 2. Level Button
C- Digital Display
D- 3. Level Button
E- Lamp On/Off Button
(A) Button: The hood operates in 1st speed level by pressing
this button. (Displayed on the screen) The screen and hood turn
off when you press this button again to switch off the appli-
ance.
(B) Button: The hood operates in 2nd speed level by pressing
this button. (Displayed on the screen) The screen and hood turn
off when you press this button again to switch off the appli-
ance.
(E) Button: The hood operates in 3rd speed level by pressing
this button. (Displayed on the screen) The screen and hood turn
off when you press this button again to switch off the appli-
ance.
(C) Digital Display: It shows the selected speed and warning
symbols.
(D) Lamp On/Off button: You can illuminate the cooking area by
pressing this button.
Cleaning Periods for Metal Filters: Filters should be cleaned
when "C" symbol is shown on the display (every 60 hours) or
every four weeks (according to use). Press and hold down the
button A for more than 3 seconds (while the appliance is off)
to delete the "C) symbol after cleaning and installing the filters.
The letter E will be shown on the display and it will switch to
normal operation. If you want to operate the appliance witho-
ut deleting the C signal, the active speed will be shown for 1
second when you press any of the level buttons and the motor
will continue to operate in the selected level after the C signal
is shown again.
30 / EN
C
D E
3 5
4
Automatic Stop 15 mins.: The appliance has an automatic stop
feature to eliminate the odour, to discharge the steam after
cooking is complete, and to have the appliance stopped auto-
matically while ventilating the environment for a while.
To activate the automatic stop feature, press the same button
(A, B, D) according to the current speed level for 3 seconds. At
the end of operation for 15 minutes, all operating functions of
your appliance will stop.
Automatic stop feature will be deactivated and the motor of
the appliance will stop when you press the same button cor-
responding to the speed level while the automatic stop feature
is active. This feature will be deactivated when you switch to
different speed levels. If you want the appliance to stop auto-
matically, you need to reactivate the automatic stop function
of the appliance.

3.5 Lamp Replacement

3.5.1 Candle Bulb Replacement
WARNING
A
Cut the power supply of the hood. Lamps
may burn your hands while hot, so wait for
them to cool down.
Pic. 11: Candle Bulb Replacement
• Remove the aluminum cartridge filter. Remove the faulty
lamp and replace it with the one having the same value.
Pic. 11
3.5.2 Replacement of Halogen Lamp
Pic. 12: Replacement of Halogen Lamp
• In order to replace the halogen lamps; press down from
Hood / User Manual