Elektrabregenz DB 6043 Benutzerhandbuch Seite 29

3 Installation and Use of the Appliance
Pic. 8
1. 3.5 x 9.5 Screw
2. Ø 120 mm Plastic Flue
3. BodyValve Pin Socket
• Attach the plastic flue contained in the package to the body
of the appliance using 2 screws 3.5 x 9.5. (Pic. 8) Do not rub
it against the surface. Pic. 8
Pic. 9
1. Air discharge pipe
2. Air exhaust flue of the hood
• Attach the air discharge pipe to the air exhaust flue and
fasten via clamp (Pic. 9).
Hood / User Manual
1
A
2
3
1
2
Pic. 10
1. Kitchen cabinet bottom view
2. 4x40 hood installation screw
• Place the hood into the kitchen cabinet and attach the hood
to 4 installation holes drilled before (Pic. 10).
3.4 Use of the Appliance
3.4.1 Use of the Rocker Switch
• Bring the lamp switch to position '0' to turn off the lamp.
• Bring the lamp switch to position '1' to turn on the lamp.
• Bring the motor switch to position '0' to turn off the motor.
• You can operate the motor in the 1st speed level minimum
and in the 3rd speed level maximum according to the density
of cooking steam.
CAUTION
As the bends and elbows in the aluminum
pipe will cause decrease in the air suction
power, using these must be avoided as
much as possible.
1 2 3 4 5
29 / EN