Elektrabregenz DB 6043 Benutzerhandbuch Seite 28

3 Installation and Use of the Appliance
3.1 Position of the Appliance
• Attention should be paid to the distance between the hob
and hood before installation. This distance should be 65 cm.
• The measure must be taken from the grill surface on gas
hobs and from the glass surface on electric hobs.
Your new appliance is especially energy effi-
C
cient. You will find here some advises on how
to save more energy while using the applian-
ce, and required to destroy the appliance in a
proper way.
3.2 Things to do for energy saving;
• Ensure sufficient air intake to make the hood operate effici-
ently and with low operation noise during cooking.
• Set the fan level according to the density of steam in kitc-
hen. Use the high level only when needed. A lower fan level
means less energy consumption.
• If dense smoke is expected in the kitchen, select a higher
level of fan in advance. It is required to operate the hood
much longer to remove the smoke already spread all over
kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated, thus, the effi-
ciency of the ventilation is increased and the risk of fire is
eliminated.
3.3 Installation of the Appliance
28 / EN
CAUTION
A
Use protective gloves and glasses while
performing drilling and cutting operations.
Pic. 6
Drilling Mounting Holes
• Adhere the installation template provided with the appliance
onto the surface on which the installation will be carried out.
• Drill the holes indicated on the installation draft with A, B, C,
D using a Ø4 mm drill bit. Pic. 6
Pic. 7
• Cut the lower surface of the cabinet where the hood will be
installed in the dimensions specified in the technical drawing
(Pic. 7).
Hood / User Manual