Product Selection And Project Engineering; Mounting And Installation; Mounting / Dismounting - Stahl 9170/21-30-10 Betriebsanleitung

Product Selection and Project Engineering

EN
5 Product Selection and Project Engineering
EN
Install and set up the cabinet in such a way that all devices installed within it are always
EN
operated within their permissible temperature range (see cabinet installation guide).
EN
EN
NOTICE! Malfunction or device damage in the event of improper circuitry.
EN
Non-compliance can result in material damage.
EN
 When using the device for temporary electrostatic grounding (terminal 10, 11 or 14, 15),
connect inputs with the grounding monitoring terminal 9191/GM-01.
EN
EN
6

Mounting and Installation

EN
EN
6.1

Mounting / Dismounting

EN
 Mount the device carefully and only in accordance with the safety notes
(see Chapter "Safety").
EN
 Read through the following installation conditions and assembly instructions carefully and
EN
follow them precisely.
EN
6.1.1 Operating Position
EN
The operating position is optional.
EN
6.1.2 Mounting / Dismounting pac-Bus
EN
The pac-Bus is an accessory which facilitates wiring of the auxiliary power.
EN
The components for the pac-Bus Type 9194 must be ordered separately.
EN
EN
EN
Mounting
EN
EN
EN
 Connect the required
number of pac-Bus
elements.
Dismounting
 Proceed in the reverse order to mounting.
8
Switching repeater – Leakage monitor
Type 9170/21-30-10
07392E00
 Engage the pac-Bus
elements on the DIN rail.
07391E00
 Connect the terminal
set at the beginning and
at the end.
202806 / 9170614310
2020-08-31·BA00·III·en·03
15551E00