Connecting The Remote Control - Philips EXP511 Bedienungsanleitung

Connecting the remote control

Use only the AY 3769 remote control.
Press 9 on the set twice to switch off the set.
1
2
Firmly connect the remote control to
LINE OUT/p on the set.
3
Firmly connect the headphones to the plug on
the remote control.
On the remote control keep 2; pressed for
4
1 second to switch on the set and to start playback.
➜ Playback starts.The album number (MP3-CDs only) and the track number
are displayed on the remote control´s display.
Set VOL E on the set to position 8 and adjust the volume with
5
E VOLUME on the remote control.
Note: Replace the batteries as soon as no batt is displayed on the remote
control´s display.
Belt clip
1
Align the belt clip as indicated in the illustration
and press on the clip to insert its shaped pin
into the hole in the set.
2
Turn the clip clockwise as indicated to lock the
belt clip to the set.
To detach, gently lift the belt clip where LIFT is
0 0
indicated and turn it counter-clockwise.
Accessories
1
2
27