Programming; On-Screen Display (Osd) - Honeywell HCD484L Bedienungsanleitung

Programming

On-Screen Display (OSD)

Press MENU briefly to confirm the current operation setup.
The information (see
seconds if there is no button action.
Even though the OSD message disappears, the Camera ID
or Title continues to display, if selected in the CAMERA ID
sub-menu. To turn off the Camera ID or Title, either:
• With external communication, change the display
position. Options are
Bottom right, bottom left, top left, top right, non-display
• If you do not need to display the Operating OSD (for
example, for an external text overlay board), set it to
OFF at all times through a remote control using an
RS485 connection.
Figure 8
Back Light displays if BLC is enabled (see
(Backlight Compensation).
Shutter Speed displays if the default shutter speed is
changed.
WB Mode always displays.
Rev 2
Figure
OSD Information Display
CAMERA ID/TITLE
Back Light Shutter Speed
8) disappears after a few
WB Mode
8
BLC MODE
G-113079-002
02/07