Emptying The Condensate Drawer . En; Cleaning The Lint Filter - hanseatic HKT8BGT2 Gebrauchsanleitung

Emptying the condensate
drawer
The condensate drawer (10) must be emptied
after every use. If the condensate drawer (10)
is full, the cycle will stop and the symbol
will appear. After emptying the condensate
drawer (10), you can press the Start/Pause
button (2) to resume the cycle.
1. Use both hands to pull out the conden-
sate drawer (10).
(10)
2. Pour the condensate into a basin.
3. Slide the condensate drawer (10) back
into the dryer.
Cleaning and maintenance
(10)

Cleaning the lint filter

(9)
1. Remove the lint filter (9) from the bracket.
2. Open the lint filter (9).
3. Either remove the lint with your hands or
rinse the opened lint filter under running
water.
4. Close the lint filter.
5. Allow the lint filter to dry completely .
6. If required, remove the lint on the lint filter
or in the lint filter bracket using a vacuum
cleaner.
Page EN-21