Switching The "Save Time" Setting On/Off; Activating/Deactivating Sound; Setting The Anti-Crease Feature; Switching Button Lock On/Off - hanseatic HKT8BGT2 Gebrauchsanleitung

Page EN-18 Available settings
3. Press the Start/Pause button (2) to begin
the cycle.
Switching the "Save time"
setting On/Off
• To switch the "Save time" setting on or off,
press the "Save time" button (11).
The symbol appears on the display (4).

Activating/deactivating sound

By default, the dryer will play sounds, e.g.
when the cycle selector is turned, the settings
buttons are pressed, or the drying process is
complete.
• Press the button for the buzzer (12) to ac-
tivate or deactivate the sound function.
Setting the anti-crease
feature
This feature helps ensure clothes stay crease-
free after the drying process. By default, the
anti-crease phase will run for 30 minutes af-
ter the drying process. The duration can be
increased up to 120 minutes.
The laundry can be removed during the an-
ti-crease phase.
The anti-crease feature can be set for all cy-
cles except for Cool and Airing.
• Press the button for anti-crease (13) to
set the anti-crease feature.

Switching button lock on/off

The dryer is equipped with a special button
lock to prevent e.g. children from accidentally
pressing buttons and interrupting the drying
process, for example. The button lock can be
activated only when a cycle is already run-
ning.
• To activate the button lock, press and
hold both the button for anti-crease fea-
ture (13) and the button for the buzz-
er (12) simultaneously for 3 seconds.
The button lock symbol will appear on the
display. All buttons and the cycle selector
will be disabled, with the exception of the
On/Off button (1).
• To deactivate the button lock, press
and hold both the button for anti-crease
feature (13) and the button for the buzz-
er (12) simultaneously for 3 seconds.

Customised settings

This feature allows you to save a customised
cycle that you use often and want quick ac-
cess to.
1. Select your desired cycle and adjust any
additional settings as required.
2. To save the cycle and settings, press and
hold the "Save time" button (11) for
3 seconds.
The symbol for the customised setting will
flash on the display (4).
3. To select the customised cycle later, turn
the cycle selector (5) to the position "Cus-
tomised".
4. To change the customised settings, re-
peat steps 1 and 2.