OHAUS Valor 3000 Serie Bedienungsanleitung Seite 12

EN-10
5.3 Sealing
The local weights and measures official or authorized service agent must apply a
security seal to prevent tampering with the settings. Refer to the illustrations below
for sealing methods.
Wire Seal
Remove the spacers under the cross
drilled screws. Re-install the screws and
feed the wire through the cross drilled
holes.
Paper Seal
Place the paper seals over the screws
and sealing spacers.
Figure 5-2. Sealing methods.
Valor 3000 Series Scales