Polishing The Paintwork; Maintenance And Care; Notes Regarding Environmental Protection; Contact Information - APA 20999 Bedienungsanleitung

6.3.3 POLISHING THE PAINTWORK

Only polish painted areas. Labels and
fi lm cannot be polished. If you attempt
to polish them, they will be damaged
or destroyed, and may damage the
paintwork.
After you have applied and worked in the care
product, it must be removed and the paintwork must
be polished. Depending on manufacturer/type, the
applied polishing agent must be completely dry. Now
completely remove the care product by polishing the
paintwork with the terrycloth hood in the same order
in which you applied the polish. Set the appropriate
revolutions for your care product.
Set the revolutions back to the lowest
level every time you switch the device off .
This prevents accidents when switching
back on again.

7. MAINTENANCE AND CARE

Clean the polishing machine after each use. Pay
particular attention to ensure the ventilations slots
are clean. To do this, use a dry, soft cloth. Do not use
aggressive cleaning agents or solvents. Never allow
liquids to get into the device. You can use compressed
air at a low-pressure to blow-out the device.
The polishing plate/hood can be washed by hand in
warm water. Leave the polishing plate/hood to air
dry.
Store the polishing machine without the hood.
Position the polishing machine in such a way that
the support plate is not distorted. Do not place other
objects on the support plate.
8. NOTES REGARDING ENVIRONMENTAL
PROTECTION
Do not dispose of electrical devices
with the household waste! Electrical
and electronic scrap must be collected
separately and disposed of in an
environmentally responsible manner
for recycling. Please contact your
community or city administration
regarding disposal options for electrical
and electronic scrap.
Labelled as per Section 17 of the German
Batteries Act (BattG): The end consumer
is obliged to send to the dealer for proper
disposal or to hand in at an appropriate
collection point.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
11