Hama 2K121703 Bedienungsanleitung Seite 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for future
reference. If you sell the device, please pass these operating instruc-
tions on to the new owner.
Controls and Displays
1. Micro-USB input
2. Antenna cable
3. Operating LED
4. On/off switch
5. Fastening screw for base / wall bracket
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a dangerous
voltage of su cient magnitude to constitute a risk of electric
shock.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
2. Package Contents
• DVB-T Indoor Antenna
• USB cable
• Base / wall bracket
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating and use it
in dry rooms only.
• Children should be supervised to ensure that they do not play with
the device.
• Do not use the product in areas where the use of electronic devices
is not permitted.
• Do not use the product in the immediate vicinity of heaters or other
heat sources or in direct sunlight.
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of the reach of
children!
• Do not operate the product outside the power limits given in the
speci cations.
• Do not use the product in moist environments and avoid splashes.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.
2
Risk of electric shock
• Do not open the device or continue to operate it if it becomes
damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave
any and all service work to quali ed experts.
4. Speci cations
Rated power consumption
Supply voltage antenna
Power supply
Frequency band(s)
Active antenna gain
Connection
Ambient temperature
5. Getting started and operation
5.1 Powering the antenna using the antenna cable (Fig. 2a)
• Connect the coaxial cable of the antenna to the antenna input on
the digital TV or set-top box.
• Switch the antenna on using the on/off switch (4). The LED (3)
lights up.
• Switch on the digital TV (and the set-top box, if present).
Note
Powering the antenna directly from the set-top box or digital TV
requires a supply voltage of 5 V. Note that the voltage of +5 V is
provided by the set-top box and/or digital TV. Make any necessary
settings in the menu.
5.2 Powering the antenna directly using the USB port of the
digital TV / set-top box (Fig. 2b)
• Connect the coaxial cable of the antenna to the digital TV or
set-top box.
• Connect the USB cable to an unused USB port on your TV or
set-top box.
• Switch the antenna on using the on/off switch (4). The LED (3)
lights up.
• Ensure that the set-top box or digital TV is switched on.
max. 25 mA
5 V
5 V 25 mA via USB
UHF: 470 – 790 MHz
VHF: 174 – 230 MHz
UHF: 6 – 15 dBi
VHF: 5 – 14 dBi
coax plug
-20 to +40° C