Polar WearLink+ Gebrauchsanleitung Seite 5

Downloaded from www.Manualslib.com
iron, dry clean or bleach the strap. Do not use
detergent with bleach or fabric softener. Never
put the transmitter connector in a washing
machine or drier!
Dry and store the strap and connector
separately.
Wash the strap in a washing
machine before long-term storage, and always
after use in pool water with high chlorine
content.
Keep the transmitter in a cool and dry place. Do
not store wet in non-breathing material, for
example, a sports bag. Sweat and moisture keep
the electrodes wet and activated. Do not expose
to direct sunlight for extended periods.
Batteries
To change the battery yourself, follow below
instructions. See picture C.
1. Using a coin, open the battery cover by
turning it counterclockwise to OPEN.
2. Insert the battery (CR2025) inside the
cover with the positive (+) side against
the cover. Make sure the sealing ring is in
the groove to ensure water resistance.
3. Press the cover back into the connector.
4. Use the coin to turn the cover clockwise
to CLOSE.
To ensure long life, open the cover only when
changing the battery. Always replace a damaged
sealing ring with a new one.
Battery kits with sealing rings are available at
Polar retailers and authorized Polar Service
Centers. In the USA and Canada, sealing rings
are available at authorized Polar Service Centers
only.
manuals search engine
E N G L I S H
3