Getting Started; Care And Maintenance - Polar WearLink+ Gebrauchsanleitung

Downloaded from www.Manualslib.com
E N G L I S H

Getting Started

When using the Polar WearLink+ Bluetooth
transmitter for the first time, you need to pair
the transmitter with your receiving device. For
more information on enabling the Polar
WearLink+ Bluetooth transmitter and starting
the application consult separate user
instructions supplied by the application
manufacturer.
In case the application asks for a PIN code,
please enter 0000. The PIN code is printed
also on the back of the connector of the Polar
WearLink+ Bluetooth connector.
To ensure sufficient transmission range from
your Polar WearLink+ Bluetooth transmitter to
the receiving device, keep the receiving device
as close as possible to the transmitter. A good
place is in a pocket, fixed on the belt or in a
small bag on the side. Do not wear the receiving
device on your back (for example, in a back
pocket or back pack).

Care and Maintenance

The transmitter is a high-tech instrument that
should be handled with care. The following
instructions will help you fulfill guarantee
obligations.
Detach the transmitter connector from the
strap and rinse the strap under running water
after every use.
Dry the connector with a soft
towel. Never use alcohol or any abrasive
material (steel, wool or cleaning chemicals).
Wash the strap regularly in a washing
machine at 40ºC/104ºF or at least after every
fifth use.
This ensures reliable measurement
and maximizes the life span of the transmitter.
Use a washing pouch. Do not soak, spin-dry,
2
manuals search engine