Scan Settings; Audio Settings; Chapter5: Aux In Mode; To Play Audio With Aux In Mode - Albrecht DR333 Bedienungsanleitung

4.5 Scan Settings

4.6 Audio Settings

Aux In mode plays audio from an external source such as for example an MP3 player.

5.1 To play Audio with AUX in Mode

1. Turn the volume low on both radio and if adjustable the audio source device.
2. Connect the external audio source to the Aux input 3.5 mm stereo socket.
3. Touch
Or press Aux via remote control to enter.
4. Adjust the volume of your radio by touching
Downloaded from www.Manualslib.com
By default, FM scans stop at any available station. This may result in a poor
signal-to-noise ratio (hiss) from weak stations.
To change the scan settings to stop only at stations with good signal strength, touch
> Stop on stations and change from All to Strong.
By default all stereo stations are reproduced in stereo. For weak stations this may result
in a poor signal-to-noise ratio (hiss).
To play weak stations in mono, touch
Chapter 5: AUX in Mode
on the screen menu.
as required.
manuals search engine
> Force mono > Yes.
(and if necessary the audio source device)
13