Manual Tune Buttons; Auto Scan Buttons; Information Display - Albrecht DR50 Bedienungsanleitung

6 FM Mode
1. Turn on the radio on the back cabinet
2. If it is already in standby mode, just press the Standby button
3. Press the Mode button until a FM mode is shown on the LC Display.
87.80 MHz
Auto (Mono)
6.1 Menu Button
The menu allows you to configure the settings for the FM Radio
Press the "Menu" button to select the following options:
• Contrast setting
• System reset
• Software version
For details on the settings please see the DAB chapter above.
• Sound Format
Press the "Select" key to select either "Mono" or "Auto" format.
"Auto": If the radio receives a stereo signal, it will play the station in stereo
sound.
"Mono": The station is only played in mono.

6.2 Manual tune buttons

They allow you to change the frequency manually
1. Press "2" to tune the frequency increasingly by 0.05MHz
2. Press "1" to tune the frequency decreasingly by 0.05MHz

6.3 Auto scan buttons

If you want to let the radio search for the next available station automatically:
1. Press the "Scan" button, the radio will scan the stations in 0.05 MHz steps
until it finds a station.
2. When the auto scan is in progress you can press the "1" or "2" button to
stop it.

6.4 Information Display

Press the "INFO" button to change the information that will appear on the
second line of the LC display when listening to a FM radio station.
10