Product Diagram - INTEZZE CLIQ Bedienungsanleitung

Product diagram

1 - Microphone
5 - ear tip 6 - LED indication
Pairing
After being taken out from the charging case, the earphones will be paired automatically.
Pairing with the smartphone :
1) Take out the earphones from the charging case and confirm that the earphones
are waiting to be paired. At this time, the two earphones flash blue lights quickly.
2) Turn on the smartphone's Bluetooth, search Bluetooth devices and click 'CLIQ'.
A voice prompt as 'Connected' will sound then.
3) After the pairing is successful, take out the earphones from the charging case
and they will pair with the smartphone automatically.
Powering ON / OFF
Power ON
Method 1: Take out the earphones from the charging case, the earphones will auto-boot.
Method 2: In the off state,press and hold the touch area of the earphones for 1 seconds,
the earphones will turn on, and you can hear the prompt "power on".
POWER OFF
Method 1: Put the earphones into the charging box. They will shut down automatically.
Method 2: Turn off the Bluetooth switch of mobile phone, and the earphone will
automatically shut down in five minutes.
Method 3: Turn off the Bluetooth switch on your mobile phone, press the earphone for
1 second and the earbuds will shut down.
2 - Microphone 3 - LED indication
7 - charging case
4 - touch control area
8 - USB-C charging interface