Before Using The Numa Piano; Audio Output; Audio Input - Studiologic numa piano Bedienungsanleitung

Before using the NUMA Piano

Sustain / Expression pedal
8 NUMA Piano by Studiologic®
Downloaded from www.Manualslib.com
Power connection
Use the power chord supplied with the device to connect the
NUMA Piano to the power socket. Switch the unit on by using
the power button near to the power socket of the NUMA
Piano.
Music stand The music stand supplied can be attached to the brackets on
the back of the unit.
Connect the sustain pedal VFP 1 supplied with the unit at the
socket which is labelled Hold.
At the socket labelled Expression, you can plug in the Studio-
logic pedal VP 25, which is available as an optional extra.
Note: If you would like to attach other pedals, please refer to the required
specifications on page 65.

Audio output

Connect the audio outputs Left and Right with the inputs of
your mixing desk or amplifier etc.
Headphones
Plug in your headphone(s) at one of the headphone outputs.
You can use up to two headphones at the same time.
Volume
When you use the NUMA Piano for the first time, we recom-
mend you to turn the Volume knob on the Output section
to not more than half way between 0 and Full. While you are
playing you can adjust the volume as you choose. Adjusting
the Volume knob effects all audio and headphone outputs at
the same time.
CAUTION:
To prevent hearing damage you should – as with all audio de-
vices – avoid using the NUMA Piano at high volume for long
periods.

Audio input

You can plug in external audio devices, such as mp3-players
for playback or MIDI sound modules, at the audio input. The
Level knob near the jack on the back of the NUMA Piano is for
adjusting the input level.
USB For data transmission via USB, connect the NUMA Piano to
your computer with a USB cable. The first time you switch the
NUMA Piano on, it will be recognised by your computer auto-
matically and the appropriate driver will be installed by the OS
(class compliant).
manuals search engine