Effect Selection - Studiologic numa piano Bedienungsanleitung

Effects
Free
• Modulation speed
• Vibrato
12 NUMA Piano by Studiologic®
Downloaded from www.Manualslib.com
Display - Value +/-
• Display and adjustment of
Effect assigns
Function
• in combination with Effekt-
Assign

Effect selection

To select a Modulation or Reverb effect, step through the
algorithms by tapping the corresponding Select button. The
selected effect is indicated by LED. If no LED is lit up, no effect
is active. Both effect machines can be used independantly at
the same time.
Use the Amount or Mix knob to adjust the intensity or the
effect mix..
Effect assign for In Split or Layer mode you can choose if an effect is be
Splits / Layer applied to just one or both sounds. Press and hold Function
while selecting the appropriate
time. The display will show the following options from which
you make a selection, using Value +/-:
Press Function again to keep the adjustment and quit the
effects assign mode.
Tip: This function is very useful if you would like to play in split mode an
Organ sound with Rotary effect at the upper zone and a Bass at the lower
split zone, which obviously should not have this effect. The assignment
can be individually adjusted for both effect machines. Independent of the
actual status of the effect machines (selected effect or off ), adjustments
can be made.
Free Wheel The Free wheel can either send the modulation data defined
by the MIDI standard (Vibrato) or control a second parameter
of the internal processed modulation effect, namely the
modulation speed.
To access the settings press Function &
display shows both options Modulation and Effect between
which you can choose using Value +/-. To adjust the modula-
tion speed with the Free wheel, choose Effect.
Press Function again to store the adjustment and quit the
free wheel mode.
manuals search engine
Display / Option Effect applies to
U-L (Upper/Lower)
both split zones / layer
U (Upper) upper split zone / layer 1
L (Lower)
lower split zone / layer 2
Amount / Mix
• Intensity of Modulation
• Reverb mix (dry/wet)
Select - Assign
• Effect selection
• Effect assigns
Assign
button at the same
Free Wheel. The