GCE MEDIWET Bedienungsanleitung Seite 4

5. PRODUCT DESCRIPTION AND TECHNICAL DATA
A. Inlet connection
B. Outlet connection
1. Container
2. Seal
3. Cap
4. Silicon hose
5. Diffuser
EN
DIMENSIONS
Total height
Diameter
Width with inlet adapter
Weight
Capacity
Inlet connection
Outlet connection
Consumption
Flow range
Pressure range
Humidity produced
Noise level
MATERIALS
Container disinfectable
in autoclave at 121°C
Container disinfectable
in autoclave at 134°C
Cap with inlet adapter
Inlet connection
Diffuser
Hose
Gasket
Seal/O-rings
200 ML
190 mm
57 mm
67 mm
70 g
max. 100 ml of water
G3/8, M12x1.25, 9/16
UNF, G1/4
hose adapter Ø 5–9
mm
8 ml of water/hour
with supply of oxygen/
air of 10 l/min at 23°C
up to 15l/min
6 bar max
Higher than 10 mg/l
at 22°C
<50dB to 1 m from the
humidifier
200 ML
polycarbonate
polysulfon
polypropylene
polypropylene-coated
brass
polyethylene
silicon
silicon
EPDM
4/48
500 ML
190 mm
90 mm
112 mm
156 g
max. 370 ml of water
G3/8, M12x1.25, 9/16
UNF, G1/4
hose adapter Ø 5–9
mm
8 ml of water/hour
with supply of oxygen/
air of 10 l/min at 23°C
up to 15l/min
6 bar max
Higher than 10 mg/l
at 22°C
<50dB to 1 m from the
humidifier
500 ML
polycarbonate
polysulfon
polypropylene
polypropylene-coated
brass
polyethylene
silicon
silicon
EPDM