Powerboost Function; To Activate; To Deactivate; Time Program Function - Viva VVK2 I 2 Serie Gebrauchs- Und Montageanleitung

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level
All the hotplates have this function.

To activate

The hob must be switched on, but no hotplate should be
working.
Select a hotplate.
1.
Press the Boost symbol.
2.
The indicator lights up
›
The function should be activated.

Time program function

This function may be used in two different ways:
to automatically switch off a hotplate
■
as a timer
■

Turning off a hotplate automatically

The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
Selecting the required hotplate and power level.
1.
Press the symbol. The
0
2.
up. is displayed on the time program function display.
‹‹
Press the + or - symbol. The basic setting appears:
3.
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Select the hotplate . Press the
cooking time with the + or - symbols, or set to
46
Š .
indicator on the hotplate lights
Ú
0 symbol and change the
‹‹ .
Note: If any hotplate is switched on when the Powerboost
function is working, › and
the power level Š will then be set
will be deactivated.

To deactivate

Select a hotplate.
1.
Press the Boost symbol.
2.
The indicator will disappear and the hotplate will return to
›
the power level .
Š
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
‹‹
The indicator on the hotplate lights up. Pressing the
Ú
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
The timer can be selected in two different ways:
1.
If you have selected the hotplate: press the
■
twice.
If you have not selected the hotplate: press the
■
The indicator next to the
Ú
displayed on the time program function display.
Press the + or - symbol. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the symbol various times until the
0
the symbol lights up. Change the time or set to
W
the + or - symbols.
Once the time has elapsed
A warning signal sounds.
function display. After 10 seconds the indicators turn off.
Pressing the 0 symbol turns off the indicators and stops the
beeping.
Š will flash on the hotplate display;
Š . The Powerboost function
appears for 10 seconds.
symbol
0
symbol lights up.
W ‹‹
indicator next to
Ú
‹‹
is displayed on the time program
‹‹
0
symbol.
0
is
with